Combo Tester

Product Details:

The Desco Combo Tester X3 verifies the functionality of personnel grounding devices (wrist straps1  foot grounders, ESD shoes, smocks2 Three independent tests are performed simultaneously on the wrist strap and each foot. Green lights indicate a pass condition. Red and yellow lights plus an audible alarm indicate when the wrist strap and/or footwear (left or right) have failed. DIP switches may be accessed for test limit preferences. Access control to an ESD Protected Area can be further enforced by using the relay terminal on the Combo Tester X3 and connecting it to an electronic door lock or turnstile to grant access only to those who have passed their personnel grounding device tests. The Combo Tester X3 is calibrated to NIST standards and includes a certificate.

Desco Combo Tester X3 Technology
The solid-state touch test switch maintains test accuracy and extends the lifetime of the tester The 30 volt test signal increases test reliability Pairs with the EMIT 50755 ESD Glove Test Fixture to test operators that wear ESD gloves or finger cots per Compliance Verification required by ESD TR53 This product can be used as one of the tools to fulfil EN 61340-5-1 Compliance verification requirements “Process monitoring (measurements) shall be conducted in accordance with a compliance verification plan that identifies the technical requirements to be verified, the measurement limits and the frequency at which those verifications must occur. … Compliance verification records shall be established and maintained to provide evidence of conformity to the technical requirements. The test equipment selected shall be capable of making the measurements defined in the compliance verification plan.”“Wrist straps should be tested periodically. The frequency of testing, however, is driven by the amount of usage, wear and ESD risk exposure that can occur between tests. For example, what is the quantity of product handled between test periods? Because wrist straps have a finite life, it is important to develop a test frequency that will guarantee integrity of the system. Typical test programs recommend that wrist straps that are used daily should be tested daily. However, if the products that are being produced are of such value that a guarantee of a continuous, reliable ground is needed then continuous monitoring should be considered or even required.”

Product Details:

Now you can easily and reliably restrict the entry of personnel without valid personnel grounding into EPAs (ESD Protected Areas) by using a Combo Tester. The system consists of a tester (combo tester) to validate the wrist straps and footwear, which is connected to the Access Control (magnetic lock) of the Door. When personnel enter the EPA, they need to test their wrist strap/ESD footwear. If the resistance of the Wrist strap / ESD footwear is within acceptable range as per the ANSI ESD S20.20 standard, the door is opened by release of the Magnetic Lock on the door. The instrument shows the result on a Pass or Fail Basis.

This instrument will work both External 9V DC supply and internal built ri 9 Volts battery.
When the 9V DC Adaptor is inserted in the instrument (socket provided at Left sde of the rrotrument) the edema] 9V battery we get disconnected & the instrument will work on external supply. if the external supply jack removed instrument will work with internal battery.
The 'POWER' LED - Green ndication shows the battery is healthy. if the Red indication comes the battery is in Low voltage ad it has to be replaced.

Note :
The Battery Is Non-Rechargeable Type. The stand i5 curved away from the operator for ease Or use while testing
Advantages of the Combo Tester with

Access Control: Both Wrist Strap and Footwear can be tested separately and at the same time.

• Allows any of only operators who have valid personnel grounding deNces.
• Reduces record keeping for ISO 9001:20013 requirements since I Is a fall proof system of testing andoantrol. Jig type Pass or Fail output WM work internal 9V battery or External 9V Dc adaptor One quick operation for validating the personnel grounding .

• Good appearance and easy interface with user. The instrument  in form of a portable stand and can be moved easily for convenient placement in the shop floor. Indicates the result of each individual footwear separately In one go. The Access Control unit can be installed quickly by us.e of the easy to use manual supplied with the instrument

Areas of Application:

• Electronics Manufacturing and Stores.
• Explosives Manufacturing and Store
• Embedded Tech and Hardware Labs.
• Quality control Labs.
• Anywhere where personnel need test their personnel grounding devices poor to entry to the Area

This instrument win work both External 9V DC supply and internal built in 9 Volts battery.

When the 9V DC Adaptor is asserted in the instrument (socket provided at Len sde of the instrument) the internal 9V battery WI get disconnected 8. the instrument wit wait on external supply. if the external supply jack removed instrument will work with Internal battery.
The 'POWER' LED - Green ndication shows the battery is heathy. if the Red indication comes the battery is in Low voltage and it has to be replaced.
Note : The Battery Is Non-Rechargeable Type. The stand is curved away from the operator for ease of use while testing
Advantages of the Combo Tester with Access Control:

• Both Wrist Strap and Footwear can be tested separately and at the same time.
• Allows entry of only operators who have valid personnel grounding devices. Reduces record keeping for ISO 9001:2008 requirements since I is a tail proof system of testing and control. Jig bee Pass or Fail output a WM work internal 9V battery or External 9V De adaptor a One quick operation for validating the personnel grounckng a Good appearance and easy interface with user. a The instrument is in form of a portable stand and can be moved easily for convenient placement in the shop floor.
• Indicates the result of each individual footwear separately In one go.